metado KH 18 LTX BL 24, Оригинальное руководство пользователя

Страница: 10 / 80

ENGLISH en
10
Transport of Li-Ion battery packs:
The shipping of Li-Ion battery packs is subject to
laws related to the carriage of hazardous goods (UN
3480 and UN 3481). Inform yourself of the currently
valid specifications when shipping Li-Ion battery
packs. If necessary, consult your freight forwarder.
Certified packaging is available from Metabo.
Only send the battery pack if the housing is intact
and no fluid is leaking. Remove the battery pack
from the machine for sending. Prevent the contacts
from short-circuiting (e.g. by protecting them with
adhesive tape).
Reducing dust exposure:
WARNING - Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- crystalline silica from bricks and cement and other
masonry products, and
- arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well-
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.
This also applies to dust from other materials, such
as some timber types (like oak or beech dust),
metals, asbestos. Other known diseases are e.g.
allergic reactions, respiratory diseases. Do not let
dust enter the body.
Observe the relevant guidelines and national
regulations for your material, staff, application and
place of application (e.g. occupational health and
safety regulations, disposal).
Collect the particles generated at the source, avoid
deposits in the surrounding area.
Use suitable accessories for special work. In this
way, fewer particles enter the environment in an
uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- do not direct the escaping particles and the
exhaust air stream towards yourself or nearby
persons or towards dust deposits,
- use an extraction unit and/or an air purifier,
- ensure good ventilation of the workplace and keep
it clean using a vacuum cleaner. Sweeping or
blowing stirs up dust.
- Vacuum or wash protective clothing. Do not blow,
beat or brush protective gear.
See page 2.
1 Keyless chuck *
2 Sleeve keyless chuck *
3 Chuck lock
4 Tool lock
5 SDS chuck
6 Spindle *
7 Additional handle
8 Depth stop
9 Lock
10 Switch button (for changing the operating
mode)
11 Metabo VibraTech (MVT)
12 Rotation selector switch
13 Trigger switch
14 Lock button *
15 Handle
16 Button for reduced impact force (for working in
soft material)*
17 Battery pack release button
18 Guide groove for the dust extraction ISA*
19 Rubber cover for dust protection of the power
supply for the dust extraction ISA*
20 LED light to illuminate the workplace
21 Capacity indicator button *
22 Capacity and signal indicator *
23 Battery pack *
* depending on equipment/model/not included in
scope of delivery
6.1 Assembly of the additional handle
For safety reasons, always use the additional
handle supplied.
Open the clamping ring by turning the side handle
(7) anti-clockwise. Push the additional handle onto
the collar of the machine. Insert the depth stop (8).
Securely tighten the additional handle at the angle
required for the application.
6.2 Battery pack
Charge the battery pack (23) before use.
Recharge the battery pack if performance
diminishes.
The ideal storage temperature is between 10°C and
30°C.
In case of Li-Ion battery packs with capacity and
signal display (22) (equipment-specific):
- Press the button (21); the LEDs indicate the
charge (22) level.
- The battery pack is almost empty and must be
recharged if one LED is flashing.
6.3 Removing and inserting the battery pack
Removing:
Press the battery pack release (17) button and
remove the battery pack (23).
Inserting:
Slide in the battery pack (23) until it engages.
5. Overview
6. Initial Operation