Metabo ST 50 PENDIX -, Брошюра

Страница: 11 / 19

198 | 198 |
JIG SAW BLADES
WITH THESES ONE ALWAYS MAKES A GOOD CUT.
Colour
The colour indicates for which material the blade is suited best.
Yellow for wood
Yellow with blue lettering for wood with nails
Blue for metal
Black for special applications
Quality class
>classic< series good results and very good service life
>professional< series fast, clean and precise angle-cutting with long service life
>pionier< series cuts fast through all materials ("through thick & thin")
>expert< series for special applications
Basic blade material
HCS carbon steel, for cutting soft wood, hardboards, plastics
HSS High yielding high-speed steel, suitable for metal, aluminium work
BiM Bimetal especially flexible mix of HCS and HSS. The saw blades have a much higher life expectancy
(bimetal) than HCS and HSS and have proven their worth when there is danger of shaft-breaking
HM Hard-Metal (carbide) applicable to stainless steels, glass, re-inforced plastic, plastics, gypsum
plaster or cement fibre boards. Saw blades with HM-coating are suitable for cutting ceramic tiles
Shank forms
The jig-saw blades from Metabo are produced to all shank forms matching the
jig saws available from other brand names.
Type
Teeth milled,
waved for clearance
gap
A relative rough cut,
fast progress in cutting
hard and soft wood,
aluminium, NE-metals
and plastics
Teeth ground,
offset for clearance
gap
Fast cutting in hard
and soft wood
Teeth ground, offset
for clearance angle
and clearance gap
Fine and clean cut in
wood and plastics
Teeth milled,
offset for clearance gap
A relative rough cut,
fast progress in cutting
on hard and soft wood,
aluminium, NE-metals
and plastics
The features of the Metabo jig saw blades
Single lug bayonet
shank U-Shank Makita-Shank Fine shank