![Metabo HPT C12FDHB Скачать руководство пользователя страница 25](http://html1.mh-extra.com/html/metabo-hpt/c12fdhb/c12fdhb_safety-instructions-and-instruction-manual_1776840025.webp)
25
English
4. Miter cutting procedures
(1) Unlock the turntable by lifting up on the miter
lock handle.
(2) While pressing down on the positive stop lock
button, grasp the miter lock handle and rotate
the turntable left or right to the desired angle.
(3) Once the desired miter angle is achieved,
release the positive stop lock button and press
down on the miter lock handle to secure the
turntable into position.
(4) If the desired miter angle is NOT one of the nine positive stops noted below, please see
the Miter detent override button section on page 21.
(5) Turn the LED light on and position the workpiece on the table for pre-alignment of your cut.
CAUTION:
Always check that the miter lock handle is secured and the
turntable is clamped.
If you attempt angle cutting without clamping the turntable, then
the turntable might shift unexpectedly causing injuries.
NOTE:
* Positive stops are provided at the right and left of the 0° center setting,
at 15°, 22.5°, 31.6° and 45° settings.
Check that the miter scale and the tip of the indicator are properly
aligned.
* Operation of the saw with the miter scale and indicator out of alignment
will result in poor cutting precision.
5. Bevel cutting procedures
(1) Loosen the bevel lock handle and bevel
the saw blade to the left or to the right.
When tilting the motor head to the right,
push the set button.
(2) Adjust the bevel angle to the desired
setting while watching the bevel angle
scale and indicator, then secure the bevel
lock handle. When contacting the work
bench and the main body, pull the bevel
lock handle in the direction of the arrow
mark as illustrated in Fig. 22, and change
the direction of the bevel lock handle.
(3) Turn the LED light on and position the
workpiece on the table for pre-alignment
of your cut.
(4) By using angle block (A) and angle block (B), you can easily set up bevel angles of 33.9°, 45°,
or 48°. For details, see the “Bevel angle 33.9°, 45°, 48°” section on page 19.
Miter scale
Lock
Indicator
Turntable
Postive stop
lock button
Miter detent
override button
Miter lock
handle
Fig. 21
Unlock
Bevel scale
Set button
Bevel lock handle
Loosen
Indicator
(for left bevel scale)
Bevel scale
Tighten
Indicator
(for right bevel
scale)
Fig. 22
Pull
00Book̲C12FDHB̲NA̲NA.indb 25
00Book̲C12FDHB̲NA̲NA.indb 25
2021/01/29 10:32:20
2021/01/29 10:32:20
Содержание C12FDHB
Страница 121: ...121 00Book C12FDHB NA NA indb 121 00Book C12FDHB NA NA indb 121 2021 01 29 10 33 07 2021 01 29 10 33 07...
Страница 122: ...122 00Book C12FDHB NA NA indb 122 00Book C12FDHB NA NA indb 122 2021 01 29 10 33 07 2021 01 29 10 33 07...
Страница 123: ...123 00Book C12FDHB NA NA indb 123 00Book C12FDHB NA NA indb 123 2021 01 29 10 33 07 2021 01 29 10 33 07...