Met One Instruments GT-324, Руководство пользователя, Страница: 14 / 20

GT-324 Manual Page 15 GT-324-9800 Rev B
5.2.9. Edit Date
Press to Change
DATE 30/MAR/2018
View screen. Date is real time. Press Select to enter edit mode.
Rotate and Press
DATE
3 0/MAR/2018
Blinking cursor indicates Edit mode. Rotate dial to scroll values.
Press dial to select next value. Repeat action until last digit.
Rotate and Press
DATE 30/MAR/2018
Rotate dial to scroll values. Press dial to exit Edit mode and
return to view screen.
5.2.10. Clear Memory
Press to Change
FREE MEMORY 80%
View screen. Available memory. Press Select to enter edit
mode.
Press and Hold
to Clear Memory
Hold Select dial for 3 seconds to clear memory and return to
view screen. Return to view screen if no action for 3 seconds or
key hold time is less than 3 seconds.
5.2.11. Edit Password
Press to Change
PASSWORD NONE
View screen. #### = Hidden password. Press Select to enter
Edit mode. Enter 0000 to disable password (0000 = NONE).
Rotate and Press
PASSWORD
0 000
Blinking cursor indicates Edit mode. Rotate dial to scroll value.
Press dial to select next value. Repeat action until last digit.
Rotate and Press
PASSWORD 000
1
Rotate dial to scroll value. Press dial to exit Edit Mode and
return to view screen.
6. Serial Communications
Serial communications, firmware field upgrades and real time output are provided via
the USB port located on the side of the unit.
6.1. Connection
ATTENTION:
The included USB driver CD must be installed before connecting the GT-324 USB port
to your computer. If the supplied drivers are not installed first, Windows may install
generic drivers that are not compatible with this product.
To install USB drivers:
Insert the USB Drivers CD. The install program should run automatically and display the
screen below. If an AutoPlay pop-
up window appears, select “Run AutoRun.exe”.
Finally, select “USB Drivers” to start the install process.
Note:
For proper communication, set the
virtual COM port baud rate to 38400