AEROCET 532 Manual Rev B
Page 22
5.4.
Initial Setup Screen
Figure 22 shows the
Initial Setup
screen. These items are not expected to need
to be changed frequently but need to be configured when first using the instrument.
Figure 22
– Initial Setup Screen
5.4.1. Serial
The
Serial
setting controls the behavior of the AEROCET 532 serial output hardware
available on the optional docking station. The following table lists the
Serial
settings
and describes their meanings.
Selection
Description
Network ID
Unique ID assigned to each device for networking mode (1
–
999)
485 Baud
Baud rate for the 485-serial port. The baud rate list includes
2400, 4800, 9600, 19200, 38400, 57600, and 115200.
Dock Baud
Baud rate for the optional docking station WiFi/Ethernet port.
Same baud rates as listed above.
Flow Ctrl
Flow control for the optional docking station Ethernet
Netburner (None, XON/XOFF).
