Mesto CLEANER 3265PP, Инструкция по эксплуатации

Страница: 13 / 47

GB IRL AUS USA NZ CDN IND
13
Avoid ignition sources in the environment if you spray combustible liquids.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature
(→ Table 1)
. Protect the device from frost.
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessory parts.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the piston pressure gauge to ensure the maximum
spraying pressure is not exceeded
(→ Table 1 below)
.
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (→ Section “After Use“, Section 1) .
S cope of delivery
Tank [1] with pump [2], hose [3], instructions for use [4], lever set (only for CLEANER) [5],
shut-off valve [6], carrying strap [7], spray lance with flat jet nozzle [8], extension tube [9]
(Fig. 1) .
You will find the illustrations referred to above in the front fold-out pages (pages 3 – 5).
T echnical data
Device group
P E R L A P L US C L E ANE R
Type of device
3265P 3268P 3265P P 3268P P
Max. filling amount 5 l 8 l 5 l 8 l
Total content 7.5 l 10.5 l 7.5 l 10.5 l
Max. spraying pressure 3 bar
Max. operating temperature 30 °C
Weight when empty 1.8 kg 2.4 kg 1.8 kg 2.4 kg
Material of tank Polyethylene Polyethylene
Where device is carried on the side
Technical residual quantity < 0.07 l
Max. volume flow 0.78 l/min
Recoil force < 5 N
Pressure change from 0 to 3 bar min. 5000 x
Table 1