MESTIC MPP-20, Инструкция по эксплуатации

Страница: 12 / 28

ENGLISH
Use
Remove all packaging materials from the device.
Switch on / off
Automatic switch off
To save energy, the MPP-20 powerpack is automatically switched off after 30 seconds if no devices are connected
that draw a current of more than 100 mA.
switch on / stay on
To switch off the automatic switch-off function, switch on the power station by pressing the power button for 3
seconds. This cancels the automatic switch-off function of 30 seconds and the power station remains switched
on for 6 hours after a device has been disconnected.
Turn off
To switch off the power pack, press and hold the on / off button for 3 seconds.
How to use the power pack to supply power to small 12V DC devices?
The Mestic Powerpack has a 12V DC output that can be used to power small DC devices.
Connect the DC device with the power station switched off. The power plant is automatically switched on and supplies
power to the DC port. The DC and OUT indicators light up on the LED display.
How to use the power station to use DC devices
The Mestic power pack has 2 DC outputs on the top of the product. The maximum total power is 300W.
With the power station switched off, connect the DC device to one of the DC output ports on the top. Switch on the
power station and activate the DC mode by pressing the DC button for 3 seconds.
Switch to mains mode by pressing the on / off button.
When the power is on, the indicator light next to the button lights up. The DC and OUT indicator lights illuminate on
the LED display.
Warning:
Port type and voltage standards vary depending on the country. Ensure that the voltage and port used are compatible
with device standards.
How to use the power station to charge USB devices?
Connect the USB cable to one of the USB ports of the power stations. The power station is automatically switched on
and supplies power to the USB port. The USB and OUT indicators are lit on the LED display.
USB Type-C Power Delivery, this port is compatible with USB PD devices. The USB Type-C port can be used to power
PD-compatible devices up to 60 W.
The Type-C and OUT indicator lights are lit on the LED display.
USB 3 (QC) is compatible with fast-charging devices that charge faster at 5V / 2.4A; 9V / 2A; 10V-12V / 1.5A
If you want to save energy, switch off the station by pressing the on / off switch for 3 seconds
How to use the LED flashlight
The LED flashlight has 3 modes, On, SOS and Strobe.
To turn on
Press the on / off button to switch on the LED flashlight.
Change the light mode
Press the on / off button to switch between the different lighting levels. (On / SOS / Strobbe / Off)
Switch off
To turn off the LED light, press and hold the power button for three seconds.