manualshive.com logo in svg

Mestek UT-135, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Mestek UT-135 Скачать руководство пользователя страница 10

10

Section 5: Start-Up and Operation

5.1  Control Functionality 

About buttons:

ON/OFF BUTTON. 

 

 

 

 

 

Pressing this button will start up or shut down the unit.

Press this button and select the mode you want set:
Cooling mode: cooling indicator light stays on (green) 
Heating mode: heating indicator light stays on (red)
Automatic mode: cooling indicator light and heating indicator light flashes in turn
Ventilating mode: cooling and heating indicator lights are off, the fan indicator light stays on according to the chosen fan speed
Dehumidifying mode: cooling indicator light stays on for 2 seconds and off for 1 second

Note: Changes of mode can only be done on main interface.

Press this button to set the fan speed
High fan speed: high fan speed indicator light stays on (blue)
Medium fan speed: medium speed indicator light stays on (yellow)
Low fan speed: low speed indicator light stays on (orange)
Automatic: high fan speed indicator light, medium fan speed indicator light and low fan speed indicator light flashes in turn

Note: Changes of fan speed can only be done on main interface. You cannot choose the automatic fan 

speed when in ventilating mode. When in dehumidifying mode, the fan speed is fixed at low speed.

Check the set temperature of unit by pressing this button once.
Increase the set temperature by pressing this button again.

Check the set temperature of unit by pressing this button once.
Decrease the set temperature by pressing this button again.

HEAT

COOL

HIGH

LOW

MID

M

(Blue)high fan 

speed indicator light

(Yellow)medium  fan

speed indicator light

(Orange)low fan 

speed indicator light

Heating indicator 

light red

Cooling indicator 

light green

M

Содержание UT-135





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды