Web IO installation and programming
Setup and Functioning
40
/
88
05.02.2019
8LE-D23_BA_E.docm
Configure the network
Figure 35: Web IO network settings
Pos.:
Description
1
Folder structure, basic settings, network
2
Protocol type
3
HTTP-Port
Input
Enter IP address in web browser.
Log in to W&T Homepage,
Open folder
Grundeinstellungen
.
Netzwerk
select (Figure 35, Page 40, Pos. 1).
HTTP
select as protocol type (Figure 35, Page 40, Pos.2)
.
HTTP-Port
enter (Figure 35, Page 40, Pos. 3).
The network has been configured.
Make sure that the value set in field
HTTP-Port
on the W&T homepage is
the same as the value in the
Web IO Config
window (Figure 34, Page
39, Pos. 3).