3
IR Bullet Camera
INSTRUCTION MANUAL
3. OSD Settings
Use the OSD menu to set up the camera
for optimum performance.
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
BACKLIGHT
OFF
PICT ADJUST
ATR
OFF
MOTION DET
OFF
NEXT
EXIT
SAVE ALL
PRIVACY
OFF
DAY/NIGHT
AUTO
NR
CAMERA ID
OFF
SYNC
INT
LANGUAGE
ENGLISH
CAMERA RESET
BACK
EXIT
SAVE ALL
OSD Main Menu
3.1 Lens
The LENS settings allows you to configure
Lens and brightness. Options are AUTO
(Auto Iris lens)
and MANUAL. The default
setting is AUTO.
In the AUTO submenu, you can set the
MODE as OPEN, CLOSE or AUTO. Then
select SPEED to adjust the DC Iris Lens
convergence speed.
TYPE
DC
MODE
OPEN
SPEED
046
3.2 SHUTTER/AGC
You can set the SHUTTER/AGC as AUTO or
MANUAL. The default setting is AUTO.
When LENS is set to AUTO:
It is
recommended to set SHUTTER/AGC to
AUTO mode. In the AUTO submenu, adjust
HIGH LUMINANCE MODE mode according
to your application:
•
AUTO IRIS mode:
Use this
for normal condition application
environments. The IRIS level will be
controlled by camera brightness.
•
SHUT+AUTO IRIS mode:
Use
this for high light application
environments. The exposure will be
controlled by AES or the DC Iris. The
iris level will be controlled by camera
brightness.
HIGH LUMINANCE
MODE
AUTO IRIS
BRIGHTNESS
024
LOW LUMINANCE
MODE
AGC
BRIGHTNESS
x0.25
If SHUTTER/AGC is set to MANUAL, the
submenu is shown as below. The shutter
speed is a variable from 1/50(1/60)sec
to 1/10000sec and the AGC is selectable
depending on your environment condition.
MODE
OFF
SHUTTER
1/50(1/60)
AGC
6.0
3.3 WHITE BAL
WHITE BALANCE controls color on the
screen. Options include ATW (Auto White
Balance), PUSH, PUSH LOCK, USER1,
USER2, ANTI CR (Anti Color Rolling
Suppression) and MANUAL. The default is
ATW.
•
ATW:
Select ATW when the scene
illumination varies between indoor
scenes and outdoor scene lighting.
SPEED
171
DELAY CNT
152
ATW FRAME
X0.50
ENVIRONMENT
INDOOR
•
MANUAL:
You can manually adjust
the LEVEL from 15 to 69.
•
USER1/USER2:
You can adjust blue
setting (B-GAIN) and red setting
(R-GAIN) value from 0 to 255.
•
PUSH:
When selected in the
appropriate position, the whole area
will perform white balance.
•
PUSH LOCK:
When selected in the
appropriate position, WHITE BALANCE
will perform once.
3.4 BACKLIGHT
Set Backlight compensation function.
It controls the light level to overcome
sever backlight conditions. Available
options include OFF, BLC or HLC (Highlight
Compensation) mode. The default is OFF.
If HLC is selected, HLC is activated
automatically when the camera detects
high-luminance.
3.5 PICT ADJUST
PICTURE ADJUST allows you to adjust
pictuer settings for optimal image. In the
PICT ADJUST subment, you can adjust
BRIGHTNESS, CONTRAST, SHARPNESS,
HUE and GAIN value. In addition, you can
set MIRROR to ON to reflect the image.
MIRROR
OFF
BRIGHTNESS
000
CONTRAST
128
SHARPNESS
128
HUE
128
GAIN
128
3.6 ATR*
Set ATR (Adaptive Tone-curve
Reproduction) function. You can select ON
or OFF. The default is OFF. If selecting ON,
you will enter the ATR submenu, where
you can set LUMINACE and CONTRAST to
optimize by image.
LUMINANCE
LOW
CONTRAST
LOW
*Also known as Wide Dynamic Range.
This function expands the video dynamic
range of the camera and improves
visibility of images even in high contrast
environments.
3.7 MOTION DET
MOTION DET allows to detect moving
objects on the screen. The default is OFF.
If selecting ON, you will enter the MOTION
DET submenu. You can set up to 4 motion
areas to detect moving objectives and
adjust the motion detection sensitivity
from 0 to 127.
3.8 PRIVACY
PRIVACY function mask up to 8
privacy areas on the screen from video
monitoring. The default setting is OFF.
If selecting ON, you will enter the
PRIVACY submenu. You can confi
gure
up to 8 privacy areas and set c
olor and
transparency of the privacy zones. In
addition, you can enable MOISAIC function
for the privacy zone.
Note:
If you enable MOTION DET
function, then PRIVACY function will
support 4 zones only.
REA SEL
1/8
TOP
000
BOTTOM
000
LEFT
000
RIGHT
000
COLOR
1
TRANSP
0.00
MOSAIC
OFF
3.9 DAY/NIGHT
DAY/NIGHT function allows you to set
how the camera switches between color
and black and white (B/W) mode. Options
include AUTO, COLOR and B/W. The
default setting is AUTO.
•
AUTO:
In the AUTO submenu, you
can adjust BURST value and set:
- Day->NIGHT: Set the light level
at which the camera switches to
NIGHT mode. The higher the value,
the darker the lighting must be
there before the camera switches.
- NIGHT->DAY: Set the light level at
which the camera switches to DAY
mode. The lower the value, the
brighter the lighting must be there
before the camera switches.
