3. Camera Installation
Please use the appropriate brackets or equipment to mount this camera on a desired location.
After installing the camera, your network camera should be accessed from your local network. Please
configure network routers first.
Package Content:
Camera *1 Screwdriver *1
Self-tapping screws (4x31mm)*3 Guide Pattern Sticker *1
Self-tapping screws (4x45mm)*3 Plastic anchor *3
Cable adaptor * 1 BNC connector * 1
Printed Quick Start Guide *1 Document CD *1
3.1 Installation
1. Mark hole positions
: use the guide pattern sticker to mark hole positions on the desired location. Drill 3
holes according the guide pattern and then insert the plastic anchors into holes which you drill.
2. Install the camera:
install the camera onto the ceiling/wall and fasten securely using the screws provided.
3. Adjust the pan/tilt angle:
rotate the main bracket (or the pan adjustment) adjust the pan angle and rotate
the pan adjustment to adjust the tilt angle. Then adjust the camera zoom to a suitable position.
use the screws
to fasten the camera securely
6
