Messoa NCC700, Руководство пользователя

Страница: 9 / 65

Network Camera User’s Guide
9/65
got problems after restart, user can restore the factory default settings and install it again. To
restore the device, please follow the steps below:
1. Make sure the Camera is ready first. Insert the paper clip or other tool and press and hold the
button down continuously.
2. Hold it at least 5 seconds and release the tool while the Camera is operating. Then the device
has been restored to default settings and reboot again.
Note: Restoring the factory default setting will lose the all previous settings included IP address
forever. User needs to run the IPWizard II program to search the device and configure it to let the
device work properly again.
LAN Socket
The LAN socket is a RJ-45 connector for connections to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission
speed of the network automatically. Please use Category 5 cable to connect the Network Camera
to a 100Mbps Fast Ethernet network switch or hub.
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power
This LED is used to indicate whether the camera is ready or not.