MESA ENGINEERING CabClone IR, Руководство пользователя

Страница: 8 / 24

ance you’ve chosen for the internal safety load when purchasing your CCIR does not affect the impedance load at this jack. Once
the internal load is disabled in this manner, the load impedance is determined by the Speaker Cabinet(s) you are connecting here.
NOTE: It is possible to feed more than one speaker cabinet from the TO SPKR Output. On MESA Cabinetry, use the PARALLEL
Jack on the rear jack plate to “daisy-chain” cabinets. Please note the overall combined impedance and make sure you are connecting
the correct load to your amplifier. The combined impedance of two cabinets connected in parallel will be ½ of an individual cabinet’s
impedance (i.e. 2 x 8 Ohm cabinets in parallel creates a 4 Ohm load). In this scenario, connect the 4 Ohm output of the amplifier to the
FROM AMP SPKR OUT on the CCIR. Next, connect the TO SPKR output of the CCIR to the 8 Ohm input of the first cabinet. Lastly,
connect the Parallel out of the first cabinet to the 8 Ohm input of the second cabinet. This would be a safe and proper impedance match.
On non-MESA cabinetry (or older MESA cabinetry that does not have a PARALLEL jack), a parallel box can be used to create the
same result (See diagrams on the following pages for proper connection).
PAGE 4