MESA Electronic 4C24, Руководство пользователя

Страница: 16 / 27

CPU OPERATION
SETUP STORAGE
Many 4C24 options can be saved in the serial EEPROM on the 4C24 card. These options include:
initial baud rate, COM port locations, parallel port location, etc. These parameters can be set with the
provided utility SET4C24.EXE
SET4C24 reads a text file of setup options, and programs these into the 4C24's EEPROM. These
setup files have a default extension of .CF. SET4C24 and a number of configuration files are located in
the UTILS directory of the 4C24 distribution floppy. SET4C24 is invoked with the configuration file
name as a parameter:
SET4C24 4C24.CF
Would configure the 4C24 with the EEPROM settings in the 4C24.CF configuration file.
SET4C24 has three command line switches: /D, /N and /Q. These command line switches follow
the file name. The /D option causes the 4C24 EEPROM to be initialized to it's default configuration.
When the /D option is used, no file name is needed. The /N option causes the configuration file to
modify the default configuration, and store the result into the EEPROM. If /N is not specified, all
options not specifically changed in the configuration file will remain at their previous settings.
As long as the /N or /D switches are not used, configuration files loaded with SET4C24 only affect
the options specified in the file. This makes it possible to separate the configuration files into pieces
that only affect a certain aspect of 4C24 operation. Note that EEPROM settings do not take effect
until the 4C24 is reset.
For more information on setup options you should list the 4C24.CF file in the UTILS directory of
the distribution disk. This file has all of the available setup options specified. Normal usage of the
4C24.CF file is to leave all of the options in the file, but comment out the undesired options. options
can be commented out by preceding the line with a semicolon.
SET4CSIO
The serial and parallel port settings can also be changed dynamically with the included setup utility
SET4CSIO.EXE. These setting are volatile, and will revert to the default settings at power up or
hardware reset. The setup utility can be run as part of your AUTOEXEC.BAT file.
SET4CSIO is invoked with one command line parameter, a configuration file name:
SET4CSIO COM3COM4.CFG
The command line parameter is the name of the configuration file. The configuration file is an
ASCII file containing the configuration parameters. The UTILS directory of the 4C24 distribution
disk has two example configuration files, COM3COM4.CFG and STANDARD.CFG. You should
use these files as a starting point to creating your own configuration files.
Page 16
4C24 CPU USER'S MANUAL