Meru Networks AP822 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 66

Meru Networks AP822 Скачать руководство пользователя страница 54

General Information of RF Exposure

54

least a minimum distance as specified from the user in accordance to the regulatory guide-
lines which are designed to reduce the overall exposure of the user or operator.

The World Health Organization has stated that present scientific information does not indicate
the need for any special precautions for the use of wireless devices. They recommend that if
you are interested in further reducing your exposure then you can easily do so by reorienting
antennas away from the user or placing he antennas at a greater separation distance then
recommended.

FCC Guidelines

This device meets FCC guidelines for exposure to radio waves.

The AP822eV2, AP822iV2 and XP8i include radio transmitters and receivers. It is designed
not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields)
as referenced in FCC Part 1.1310. The guidelines are based on IEEE ANSI C 95.1 (92) and
include a substantial safety margin designed to ensure the safety of all persons, regardless of
age and health.

As such the systems are designed to be operated as to avoid contact with the antennas by the
end user. It is recommended to set the system in a location where the antennas can remain at
least a minimum distance as specified from the user in accordance to the regulatory guide-
lines which are designed to reduce the overall exposure of the user or operator.

The device has been tested and found compliant with the applicable regulations as part of the
radio certification process.

Separation Distance

MPE

Distance

Limit

0.82 mW/cm2

25 cm (9.84 inches)

1.00 mW/cm2

«
...
52
53
54
55
56
...
»

Содержание AP822



































































Отзывы:

Нет отзывов