Meru Networks AP332 Скачать руководство пользователя страница 19

Страница: 19 / 73

Safety Precautions

Installing AP332e

Chapter 2

Installing AP332e

This chapter describes how to install and configure an AP332e. It contains the following sections:



Safety Precautions



Unpack the AP332e



Installation Requirements



Install the AP332e



Check AP332e LED Activity



Where to Go From Here

Safety Precautions

IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.

If an optional power supply is used, it must be one supplied by Meru Networks.

The AP332e is intended only for installation in Environment A as defined in IEEE 802.3af. All intercon-
nected equipment must be contained within the same building, including the interconnected equip-
ment's associated LAN connection.

Unpack the AP332e

Confirm that the AP332e shipping package contains these items:



AP332e

Warning!

For Power over Ethernet, an 802.3af or 802.3at connection must be used.

Содержание AP332










































































Результаты поиска

Содержание AP332

Отзывы:

Meru Networks AP332, Руководство по установке, Страница: 19 / 73

Результаты поиска

Содержание AP332

Отзывы: