Mertz 999-848.01, Руководство оператора

Страница: 47 / 90

3-21
Pre-Start Inspection and Operation
Figure 3–31 Attachment Locks in Locked Position
7. Start the engine and raise the attachment off the ground. Visually inspect the bottom edge of
the attachments mounting plate to make sure that both of the attachment lock pins are
securely holding the attachment in position.
DO NOT go underneath the attachment when it is raised.
8. Shut off the engine.
9. Move any of the main hydraulic controls forward and backward to release any stored
hydraulic pressure.
10. Attach the hydraulic hoses to the quick connects. See Figure 3–33 .
• There are two hydraulic hoses that need to be connected. The quick connect system
prevents you from incorrectly connecting the hydraulic hoses, but both hoses need to be
connected for the attachment to operate.
• Make sure that the engine has been shut off before beginning this procedure.
a. Move the AUXILIARY control levers (Items 1, 2, Figure 3–32 ) either towards the hand
grip or backwards into the REVERSE detent position. This will release the hydraulic pres-
sure locked in the auxiliary hydraulic lines. Leave the control lever in the detent position.
Figure 3–32 Auxiliary Control Lever
1 1
2022
Pins Locked
CAUTION
1
2
3
2224