For your safety
12
fr
de
en
es
pt
it
nl
sv
no
fi
da
hu
ro
pl
el
ru
¼
DANGER
Risk of fatal injury from electric shock.
All work on the device should only be carried out by
trained and highly-skilled electricians. Observe the coun-
try-specific regulations.
½
CAUTION
Faults may occur with the system.
Installation, commissioning and configuration of Uniq
may only be carried out by trained, skilled electricians.
The next dates for training courses can be found on the
Internet at:
http://www.schneider-electric.com/sites/corporate/en/
products-services/training/training.page
The Uniq Server Pro (hereafter referred to as
server
) is an in-
tegral part of the Uniq system and controls and visualises
building functions, media devices and multimedia content.
The server acts as a master and makes all data and functions
available to Uniq devices with the Uniq Interface (Uniq Touch,
television, PC, laptops, smartphones... ). This includes:
– control of lighting, blinds, and air conditioning of a KNX sys-
tem
– management of music, videos, pictures and documents
– communication inside or outside of a building (telephone, In-
ternet or from door to door)
– monitoring of the building with sensors and cameras
– integration of the systems and their functions, such as Con-
nect radio system, Bluetooth, WLAN.
The server detects plug-and-play hardware components such
as VoIP phones, cameras and network audio players, thereby
integrating them in the building control.
System design and architecture
A single server can control 100 Uniq devices at maximum, one
of which must be either
– 1 Uniq Touch
or
– 1 Uniq Client
or
– 2 computers (with Uniq Interface).
In the event that there are more than 100 Uniq devices, a Uniq
system with master/slave structure must be configured (Figure
!
, cover).
The server is ideally suited for buildings with 100 rooms or
more, e.g. hotels or large office buildings. In addition, all mul-
timedia contents can be centrally controlled (Figure
"
, cov-
er).
For your safety
Getting to know Uniq Server Pro
