- 100 -
U.motion KNX Server Plus, Touch
Installation Manual
U.motion KNX Server Plus Touch already offers an integrated support for different camera brands present in the market.
When using such a camera, the integration of it can simply be done by configuring the core parameters of the camera.
Furthermore, also cameras of different brands can be integrated by using a generic camera template; however, in this
case you have to verify if the used camera offers its image in a supported way. Further information about this topic can
be found on the following pages of this manual.
12.2
V
ISUALISATION IN
L
OCAL
N
ETWORK
When the camera image should be accessed in the local network, a direct connection between the
Client
and the IP
camera is created: U.motion KNX Server Plus Touch just adds a direct link to the IP address (and the port) of the camera
to the pages of the visualisation, so that the browser can get the video stream directly from the camera. Therefore, the
video signal must not pass through U.motion KNX Server Plus Touch, what guarantees the best performance and spares
the resources of U.motion KNX Server Plus Touch.
The following graphic shows the video flow within the local network:
IP camera
Switch
U.motion KNX Server Plus Touch
Video flow
