V5
25
2-
58
1-
01
1
0/1
6
Rotary moduleArt.-Nr. MEG5252-03../-04..© Schneider-Electric 2014V5252-581-0110/16
– To be completed with:
• corresponding inserts (see function overview)
• Frame in corresponding design
¼
DANGER
Risk of serious damage to property and per-
sonal injury, e.g. from fire or electric shock,
due to incorrect electrical installation.
Safe electrical installation can only be ensured if
the person in question can prove basic knowl-
edge in the following areas:
• Connecting to installation networks
• Connecting several electrical devices
• Laying electric cables
These skills and experience are normally only
possessed by skilled professionals who are
trained in the field of electrical installation technol-
ogy. If these minimum requirements are not met
or are disregarded in any way, you will be solely li-
able for any damage to property or personal inju-
ry.
Rotary module
Operating instructions
Art. no. MEG5252-03../-04..
Necessary accessories
For your safety
en
With the rotary module (referred to below as
module
),
you can carry out various functions such as:
• Switching, dimming and controlling blinds
• Calling up, changing and saving Basic light and blind
scenes
Function overview of the modules on re-
ceiving inserts
Complete the module with the receiving inserts for
switching, dimming or controlling blinds/roller shutters in
order to carry out
local
light and blind control.
Function overview of the modules on
sending inserts
Complete the module with the sending central unit insert
in order to carry out
global
light and blind control via the
PlusLink (PL)
.
Front:
A
Rotary knob
B
LED segments (status, orientation)
C
Module push-buttons
Rear:
A
Module interface
Getting to know the rotary module
Switching:
• Electronic switch insert Local switching, calling up
and saving local light
scenes
• Relay switch insert
• Electronic switch insert,
2-gang
Separate switching of both
channels locally
• Relay switch insert,
2-gang
Dimming:
• Universal dimmer insert Local switching and dim-
ming, calling up and saving
local light scenes
• 1-10 V control insert
• DALI insert
• Universal dimmer insert,
2-gang
Separate dimming of both
channels locally
Controlling blinds/roller shutters:
• Blind control insert
Local raising/lowering, call-
ing up and saving local Ba-
sic blind scenes
Global light and blind control:
• Central unit insert
global switching, global
dimming, global raising/
lowering, calling up and
saving global Basic light/
blind scenes
Connections, displays and operating
elements
B
A
C
A
A
Insert (see function overview)
B
Frame
C
Module
|
An initialisation period of approx. 15 s begins
when mains voltage is switched on or the module
is plugged in. The LED segments flash during this
initialisation period. After this period has elapsed,
the module is ready for operation.
"Blind/roller shutter" will be referred to below as just
"blind".
Switching loads on/off
In combination with 1-gang insert
• With push-buttons
• With rotary knob
– by rotating or briefly pressing the knob
|
With dimmer inserts a quick half turn is required to
switch directly to full brightness.
Mounting the module
Operating the module: local light and
blind control
B
C
A
< 0,5 s
