manualshive.com logo in svg

Merrylock MK480, Инструкция

Поделиться
Скачать
Merrylock MK480 Скачать руководство пользователя страница 14

B

B

A

B

A

Right overlock
needle thread

Overlock left needle
Overlock right needle

Be sure to disconnect the machine from the
electric outlet before removing needle(s).

Left and right overlock
needle thread

Flat surface to the rear

(1) NEEDLE POSITION

1

* With this machine, two needles can be inserted to

the needle clamp as shown in the drawing, single
or two needles can be used for sewing.

* The Instruction Book refers to different needle

positions by illustrating the needle clamp at right.

Note : When both the left and right overlock needles

are inserted, the left needle will be slightly
higher than the right.

(2) TO REMOVE NEEDLE (S)

10. HOW TO REMOVE AND INSERT

NEEDLES

* Turn the hand wheel toward you until the needles

are at their highest position.

* Place a thick piece of fabric [such as felt] under

the presser foot. Lower the needles halfway into
the fabric.

* Loosen, but do not remove the needle clamp

screw with the allen key while you are holding the
needles.

A. Overlock left needle

B. Overlock right needle

Note : When inserting needles into the A and/or B

needle clamps it is necessary to loosen the
needle clamp screws for both A and B.

NOTE : After removing the specific needle which
is not currently to be used for sewing, remember to
fasten the set screw in the screw hole of the needle
clamp and to just fasten tight into the hole.

Please do not over-tighten the screw into the hole or
the needle clamp will be damaged.

13

B

A

Содержание MK480










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды