![Merrychef Microcook TA1725 Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/merrychef/microcook-ta1725/microcook-ta1725_instructions-manual_1774993015.webp)
15
Error code display
The Microcook TA oven will identify some of the most common problems by flashing an error
message code in the time display window.
Error code display
Fault
Recommended action
Please remember - No servicing or repairs should be carried out other than by an approved Service Engineer
Door not fully shut.
Possible electrical fault
Oven has overheated
No time has been set.
Invalid time has been set. e.g. 61secs
The required cooking time for multiple
items exceeds 30minutes
Close door fully.
Call Merrychef Service Dept.
Clean air filter and vents
Leave oven switched on but not cooking
for 4-5 minutes.
PROBLEM SOLVING
Technical Specifications
Height
( mm )
Width
( mm )
Depth
( mm )
Microwave
Power output
( watts )
Wt.
( kgs)
Pt No. 32Z3386 Issue 05
Manufacturers recommended
clearances
50*
50
50
Power Supply: See rating plate at rear of oven
This equipment complies with the following EEC directives:
EMC 89/336 EEC
LVD 73/23 EEC
Merrychef reserves the right to alter specifications without prior notice.
Display shows 0:00 but the cavity light
and cooling fans do not operate
Control panel lights do not operate with
oven connected to mains supply.
Oven has gone into ‘stand-by’ mode, press
any pad to restart.
1. Check oven is connected to electrical
supply
2. Check fuse is correct value and in
good order.
3. Oven has overheated. Allow to cool
and check filters are clean
4. Call Merrychef Service Dept.
N
ote: For 2 ovens side by side clearance is 100mm
Remove one item and try again
Set a time
Set time in correct format 1:01
Convected hot air failure
Call Merrychef Service Dept.
TA1725
496
485
472
42.5
1925
Heater Power
( watts )
2000
Microcook TA1725
800
1400
42.5
496
485
500
100*
100
100
N
ote: For 2 ovens side by side clearance is 200mm
TA1925
Microcook TA1925
*each side