Merrychef HD, Руководство по обслуживанию

Страница: 41 / 43

Page 41 Microcook HD Ovens 32Z3385 Issue 5
5. Remove the blue fuse cover and the 13A fuse, then remove the 10A fuse and place in the 13A
fuse location. (C)
6. Remove the (BROWN) mains wire and the filter wire L2 from the 13A fuse holder. (D)
7. Move the wires from the 10A fuse holder and fit them to the 13A fuse holder. (E)
C
D
E
8. Fit new (10AMP LABEL) Pt. No. 31Z2030 over the old 13AMP label. Remove the old 10AMP
label and fit the new (20AMP LABEL) Pt. No. 31Z2092 into position so it will be visible when
new fuse holder is fitted. (F)
9. Connect the (BROWN) mains wire to the bottom location on the new fuse holder Pt. No.
30Z1178, connect the filter wire L2 to the top location of the fuse holder. (G)
10. Fit the fuse holder into position using Pt. No. 31Z3061 x1 in the upper most hole location,
ensure screw is bias towards the right hand side of the slot. (H)
11. Re-fit the blue cover to the 10AMP fuse holder. And fit the 20AMP fuse Pt. No. 30Z1177 in to
the new fuse holder. (J)
12. Power up the oven and check machine functions correctly. (Care should be taken when
powering up ovens with covers removed).
13. Turn off the power and isolate the oven from the mains power supply, then fit the cover.
14. Please ensure that you record TB067 completed on your (SVR).
F
G
H
J