TROUBLESHOOTING
CARE INSTRUCTIONS
Thank you for choosing MERRY PRODUCTS’™ PET HOUSES AND PET BEDS. With little care and
maintenance, MERRY PRODUCTS’™ PET HOUSES AND PET BEDS will provide your pet with comfort and
enjoyment for many years to come!
•
To clean panels, use clean water on a damp cloth.
•
When assembling MERRY PRODUCTS’™ PET HOUSES AND PET BEDS, please handle all
panels and/or hardware with care to avoid any possibilities of damages and/or injuries.
Merry Products, Corp.
Step 1: Towel Hanger
The option is available to attach the Towel Hanger to the Right or Left Panel.
Options
If you decide to change this possition in the future, remove the wood plugs and
exchange sides. The wood plugs may be easily remove by tapping the back of
the plugs with a screwdriver.
Step 2: Assembly of
Esure that the front lip on the floor panel is facing down.
Floor Panel
Step 3: Back Panel Does
There may be dust or debris preventing the back panels from easily sliding into
Not Slide Into Side and
place. Clear the pathway carefully using a thin object or tool.
Floor Panels
Step 9: Door Panel Catches
Use a screw driver to loosen the screws on the top hinge slightly. Once top hinge
on Floor Panel when being
is loose, lift the bottom of the door slightly. Tighten back the screws on the top
Opened or Closed
hinge.
P R O D U C T
R R Y
E
S
M
MPS006 / MPS007 GR
C
AT WASHROOM™
ver. 12.0
COPYRIGHT 2007 Merry Product, Inc
page 4
figure 9
STEP 9
To seal off the holes not used for the Towel
Hanger, insert Wood Plugs (#5) into the holes
on this side panel.
#5
#5
US Patent No. D569,053
