A
A
A
A
A
A
STEP 1
Attach the Center Cross Beam and Bottom
Cross Beam to the Back Rest using 18
A screws.
Tip: Insert screws partially through Back Rest,
then position screw end onto pre-marked points
on Cross Beams. See Figure 1 for reference.
Secure screws partially until all screws are in place,
then tighten completely.
Figure 1
STEP 2
Attach Seat Slat and Base Bottom Support
onto Seat using 4 A screws. Align screws ends
with pre-marked points.
STEP 3
Secure the Front Leg Cross Beam and
Front Legs together using 4 A screws.
Attached the Front Legs to the Seat using
2 B bolts. Pull the ottoman out to make this
assembly step easier.
page 2
v.4
B
B
A
A
A
A
STEP 4
Note that the beveled edge of the
front leg cross beam faces the top
of the chair.
Bevel
Up
