background image

 Limited Warranty 

Merritt Manufacturing, Inc. (Merritt) provides the following limited war-
ranty on the HOPE car bed. 

 
Merritt warrants to the original purchaser of the HOPE car bed that, if prop-
erly used strictly in accordance with the instructions and specifications in-
cluded in the original packaging, it shall be free from defects in materials or 
workmanship for a period of one (1) year from the date of original pur-
chase. Proof of purchase is required, including, but not limited to furnishing 
to Merritt proof that the owner registration card was returned to Merritt 
within thirty days of the original purchase or furnishing to Merritt proof of 
purchase that identifies the claimant as the original purchaser.  If any com-
ponent covered by this warranty fails for reasons covered by this warranty, 
Merritt will, at its option, provide the original purchaser with repair or re-
placement components for the covered product or component.  This limited 
warranty is available only for purchasers in the United States and Canada.  
Merritt reserves the right to discontinue or change fabrics, parts, models or 
products, or to make substitutions.  Please note that the upholstery fabric is 
subject to some degree of wear as a result of normal use.  This kind of 
normal wear is not covered under warranty.  
 
To make a claim under this warranty, you must contact Merritt via tele-
phone at (317) 409-0148 or write to the company using the address on the 
back cover of this booklet.  PLEASE COMPLETE AND MAIL THE OWNER 
REGISTRATION CARD WITHIN THIRTY DAYS OF PURCHASE TO PRE-
SERVE YOUR WARRANTY RIGHTS.  

 
WARRANTY LIMITATIONS 

This warranty does not include damages due to external sources, includ-
ing, but not limited to accident, negligence, misuse, neglect, alteration, re-
pair, improper installation, improper testing or use that is not in confor-
mance with the instructions and specifications in the instruction booklet. 

 
LIMITATION OF LIABILITY AND DAMAGES  

THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE THE SOLE 
AND EXCLUSIVE REMEDIES AND ARE PROVIDED IN LIEU OF ALL 
OTHERS, ORAL OR WRITTEN, EXPRESS OR IMPLIED.  IN NO EVENT 
WILL MERRITT, OR THE RETAILER/DISTRIBUTOR SELLING THIS 
PRODUCT, BE LIABLE TO THE PURCHASER, OR ANY USER OF THIS 
RESTRAINT OR OTHER THIRD PARTY, FOR ANY DAMAGES; INCLUD-
ING LOST PROFITS, LOST BUSINESS, INCIDENTAL, INDIRECT, SPE-
CIAL, CONSEQUENTIAL DAMAGES OR PUNITIVE DAMAGES.  IN NO 
EVENT SHALL MERRITT OR ITS AFFILIATED COMPANIES BE LIABLE 
OR RESPONSIBLE FOR ANY 
AMOUNT OF DAMAGES ABOVE THE AGGREGATE DOLLAR AMOUNT 
PAID BY THE CUSTOMER FOR THE PURCHASE OF THE PRODUCT 
COVERED BY THIS WARRANTY. 

Page 50 

WARNING! 

FAILURE TO COMPLY WITH THE 

FOLLOWING WARNINGS CAN RESULT IN 

DEATH OR SERIOUS INJURY TO YOUR 

CHILD: 

• 

Use only with children who weigh between 4.5 and 35 pounds (2.0 and 
15.9 kg) and whose height is between 13 and 29 inches (33 and 73.7 cm).  

• 

Snugly adjust the belts provided with this child restraint around your 
child. 

• 

Secure this child restraint with a vehicle belt.  

• 

Follow all instructions on this child restraint and in the written 
instructions located in the storage area on the front of the car bed.  

• 

Register your child restraint with the manufacturer.  

• 

Always position car bed (child restraint) with child’s head toward the 
center of the vehicle.  

 

• 

Add-on child restraint systems should be securely belted to the vehicle, 
even when they are not occupied, since in a crash an unsecured child 
restraint system may injure other occupants. 

 

• 

When using the 3-point harness, make sure that the straps are snug.  A 
snug strap should not allow any slack.  It lies in a relatively straight line 
without sagging.  It does not press on the child’s flesh or push the child’s 
body into an unnatural position. 

 

• 

This child restraint conforms to all applicable Federal motor vehicle safety 
standards. This Restraint is not Certified for Use on Aircraft. 

 

• 

Child restraints could be recalled for safety reasons. You must register 
this restraint to be reached in a recall. Send your name, address, e-mail 
address if available, and the restraint’s model number and manufacturing 
date to P.O. Box 17152 Indianapolis, IN 46217 or call 1-317-409-0148. For 
recall information, call the U.S. Government’s Vehicle Safety Hotline at 1-
888-327-4236 (TTY: 1-800-424-9153), or go to http://www.NHTSA.gov. 

 

• 

According to accident statistics, children are safer when properly 
restrained in the rear seating positions than in the front seating positions. 

Page 3 

Содержание HOPE





















































Отзывы: