E
StEP 16
StEP 14
StEP 15
13. Add the Nylon Washer (E) to the Swing Arm Pin Fastener (A)
before reattaching the Swing Arm Assembly.
14. Secure the long Swing Arm with the Metal Flat Washer (F) and
new Socket Head Bolt (B) supplied using the 1/4"Hex Key.
15. Secure the short Swing Arm to the Chrome Adjuster Bar
with the original Socket Head Bolt (G) using 1/4"Hex Key.
16. Reattach the long Swing Arm to the Footbar with
original Socket Head Bolts (H) using the 3/16" Hex Key.
NOTE: Ensure the Chrome Adjuster Bar is resting level in
the J-hooks on both sides.
17. Repeat steps 1 to 16 on the other side.
18. Tighten all hardware.
As shown on the SPX Max
(E)
(F)
(B)
(G)
(H)
StEP 13
P00230
PM-P00230
JAN16
™/®
Trademark
or
registered
trademark
of
Merrithew
Corporation,
used
under
license.
Printed
in
Canada.
All
rights
reserved.
2200 Yonge Street, Suite 500, toronto, ON M4S 2C6
phone
416.482.4050
fax
416.482.2742
website
merrithew.com
Please keep this manual in a safe place.
IMPORTANT
For assistance or any missing parts:
Call:
Toll-free in North America 1-800-910-0001
Toll-free in United Kingdom 0800-328-5676
Email:
