5
Initial Installation
Step 1.
Pass the supply wires from the junction box (not included) through the central hole of
the mounting bracket.
Step 2.
Secure the bracket to the junction box with the provided fasteners. Use the mounting
screws and metal washers on wood ceilings or the plastic anchor and anchor bolts on
reinforced concrete or similar ceilings.
Mounting Bracket
Wood Ceiling
Wood Screw
Supply Wires
Plastic Anchor &
Anchor Bolt
Metal Washer
Concrete Ceiling
Downrod Mounting
Step 1.
Remove the locking pin and retaining clip from the
downrod.
Step 2.
Loosen the two locking bolts on the top of the motor
assembly.
Step 3.
Carefully slide the canopy and coupling cover onto the
downrod.
Step 4.
Feed the wires of the fan motor assembly through the
downrod.
Step 5.
Install the downrod onto the top of the motor assembly,
aligning their holes and replacing the pin and the clip.
Step 6.
Retighten the previously loosened bolts.
Step 7.
Place the downrod’s top mount onto the mounting
bracket. Rotate the entire assembly until the tab has
dropped into its slot and sits firmly. The entire motor
assembly should no longer rotate if seated properly.
Failure to reattach the locking pin and/or properly seat the
downrod can cause the fan to fall from the ceiling during
operation.
DO NOT
use the fan before ensuring it is properly
secured and the motor cannot rotate.
Downrod
Mounting Bracket
Canopy
Coupling
Cover
Locking Pin
Retaining
Clip
Locking Bolt
Downrod
