Wire
LED Light Kit
Light Plate
Lamp Shade
Bolt
Magnetic Bolts
8
LIGHT PLATE & SHADE INSTALLATION
Feed the wire connector
through the middle of the light
plate. Install the light plate on
the motor assembly with the
provided bolts.
Connect the LED light kit to the
wire connector. Attach the LED
light kit to the light plate using
its magnetic bolts.
Install the glass lamp shade
onto the light plate, turning it
into place. Ensure it is firmly
connected to avoid loosening
during use.
COLOR TEMPERATURE ADJUSTMENT
The LED light has 3 different color setting: Warm White (3000K), Daylight (4500K), and
Cool White (6000K). To adjust the light settings,
1. Press
LIGHT
on the remote control to turn on the LED light.
2. Press and hold the the
LIGHT
button until the LED light turns off.
3. Press and hold the the
LIGHT
button until the LED light turns on again with the next
color temperature in order.
Repeat these steps to cycle through the 3 color temperatures.
