mermaid ventura 150 TFT - User manual Version 1.0
___________________________________________________________________________________
Page 4 af 4
3. Content of the Box
•
ventura 150 TFT (15”)
•
”Quickstart” card
Accessories bag including:
•
PSU (45 Watt)
•
Powercord
•
Speaker cable
•
Users manual
•
Glass cleaner & screen wiping cloth
4. Unpacking, Placement and Set-up (PC)
After the box has been opened, remove the accessories bag.
Bend the cardboard flaps outward and turn the box upside down, which will ensure the inlay foam
with the monitor is able to slide out. Do not drop the content on the floor.
Remove the foam side pieces and the plastic bag.
The monitor needs to be placed on a smooth and stable surface. This surface must be able to
safely support 10 kg.
Make sure both the computer and monitor are turned off before connecting the monitor.
•
Connect the monitor to the computer by means of the supplied VGA cable. (Attached to the
monitor)
•
Connect the PSU to the monitor and AC outlet.
•
Turn on the computer and monitor.
•
mermaid ventura 150 TFT is plug & play compatible via VESA DDC1/2B. Windows 98, ME and
XP will recognise this and self configure.
•
When using the mermaid ventura 150 TFT with Windows NT, the computer needs to be started
in VGA mode the first time. Log on as administrator and set the resolution to 1280x 1024 and
refresh rate to 60 Hz. The computer can then be started in normal mode.
OSD panel is located
beneath the monitor
Содержание ventura 150 TFT x4
Страница 1: ...User manual mermaid ventura 150 TFT ...