FIG 4
4. Plumb the wall profiles SP0L909C using the vertical
element of the spirit level. Mark 3 holes, drill with 6mm
masonry bit and fit wall plugs SP0B08070. Using the 3
Screw A2403001, fix wall profiles to wall.
Fig 4.
NOTE: Only silicone the wall profile after fixing to the wall
(see sealing section). Do not silicone on the back of the
wall profile before fixing to the wall.
3. Position the wall profile SP0L909C so the
seal on the moving panel sits on the inside
edge of the bath.
Fig 3.
FIG 3
INSIDE
1. The screen is reversible for fitting to a wall on the right or left. The screen is set up for Left hand use. If you need to reverse it, unscrew one of the
brackets and remove the moving panel A
Fig 1.
FIG 1
FIG 2
NOTE: Ensure the upright seal is on the inside.
Fig 2.
2. Turn the hinge post upside down, reinsert the moving panel (do not turn panel upside down). Reattach the bracket.
Fig 1.
The screen can then
be fitted on the Right hand Side of the Bath. Ensure the upright seal is on the inside.
Fig 2.
