11
19
2
3
4
3
Press and release
the yellow
learn button
Enter a 4-digit
PIN of your
choice
? ? ? ?
_ _ _ _
Press and hold
the enter button
Opener light bulbs
blink
After the lights
blink release the
ENTER button
1
Locate
the yellow
learn button
Activate the opener only when the door is in
full view, free of obstruction and properly
adjusted. No one should enter or leave
garage whilst the door is in motion. Do not
allow children to operate push button(s) or
transmitter(s). Do not allow children to play
near the door.
Wireless Keypad E840M
To set the keyless entry PIN:
1.Locate the Yellow Learn button on the garage door
opener.
2.Press and release the Yellow Learn button on the
garage door opener. The LED will light.
3.Enter a 4-digit personal identification number (PIN) of
your choice on the keypad.
4.Press and hold the ENTER button. Check to see if
the opener light blinks. Release the ENTER button
after the light bulb blinks.
To change an existing keyless entry PIN:
1.Enter the existing programmed PIN that you want to
change.
2.Press and hold the # button until the light bulb blinks
twice.
3.Enter the new 4-digit PIN of your choice, then press
the ENTER button. The light bulb will blink once.
4.To test, enter the new PIN, then press the ENTER
button. The garage door opener will activate.
KEYLESS DEVICE PROGRAMMING (OPTIONAL ACCESSORIES )
