11
INSTALLATION
INSTALLING THE POST BRACKET
7
1. Using the post bracket as a reference, mark and drill the holes for the post bracket (figure 1).
2. Attach the post bracket to the post using appropriate fixings. Masonry fixings are supplied, if required. The correct fastening
material must be used based on existing installation (building / material substance).
3. The slots on the post bracket allow for alignment. When the post bracket is level, tighten the nuts (figure 2).
Drill holes
M8x60 Masonry Anchors
Washers
Nut
figure 1
figure 2
OPENER ARM MOUNTING
8
1. Attach the opener arm to the center of the opener from the underside.
2. Secure the caps with the screw and washer.
13 mm
