Supply
Battery test
The time to change the battery depends on the configured number of signal cycles and is
specified by the battery capacity meter. After the battery is changed, the battery capacity meter
should be reset to 100%
1. Open the device.
2. Press the button [Installation mode] for 1 s.
- The LED shows the charge level. Green = ok; orange = low; red = replace battery.
Battery change
1. Open the device.
2. Press button [Installation mode] and hold.
4. Replace the batteries while holding the button.
5. Release the button after 3 s.
- the LED flashes 5 times; the battery capacity meter is reset to 100 %.
Disposal
Disused materials should be recycled. Please dispose the device according to your local
regulations.
Batteries are a danger for the environment and must be recycled according to local
regulations.
Service and spare parts
Contact your service partner for service work, spare parts exchange and optional accessories.
merkur Funksysteme AG
Wassergrabe 14
6210 Sursee
Switzerland
+41 41 925 66 00
www.merkur-funksysteme.com