10
articulating beam assembly.
g.
Remove the main tube cap (1.03 and 1.04).
h.
Check for deformations or cracks on the front frame and
replace the front frame should they exist.
i.
Remove the shroud, the anti-tipper wheel and the driver wheel
assembly by step 2.2.1, 2.2.3, 2.2.5 previously.
j.
Remove the slide pin (1.52).
k.
Loosen the release button (1.55).
l.
Loosen the nut (1.56).
m.
Remove the guide block (1.54).
n.
Remove the supporting bar (1.50).
o.
Remove the locking pin (1.51).
p.
Remove the spring (1.53).