Merits P310 series, Руководство по обслуживанию

Страница: 3 / 13

1
1. Introduction
The purpose of this manual is to provide dealers and/or distributors with
the product information and instructions that are required for servicing the
P310 powerchair.
2. Service guide
The P310 powerchair consists of three main parts:
n Seat assembly
n Body assembly
n Electrical system (Please refer to P3 /P7series Shark or VR2 service
manual)
2.1. How to replace or repair the seat assembly
The Seat assembly includes the seat body, the seat base plate, the seat
post assembly and the left/right armrest.
2.1.1. To replace the seat body
◆
When should you replace the seat body?
◇
If the seat body is worn out.
◇
If the seat body is pierced or scratched by something.
◇
If the powerchair crashed cause the seat body out of shape.
◆
How to replace the seat body?
◇
Please proceeding steps as follows if it has to replace.
Replace the seat body by the following steps if it is broken.
a. Pull the swivel lever (4.44) under the seat up to unlock it and
rotate the seat a little bit to the position where you can feel the
seat rotate freely. Pull the seat upward. (See next page)
b. Use hex tools to loosen four pieces hex fixed bolt (4.50) on
seat base plate assembly and remove the seat body from the
seat base plate assembly if it is broken. (See next page)