COPYRIGHT © 2008 MERIT ENTERTAINMENT
FIGURE 4 - WALLETTE / ENTERTAINER FROM THE LEFT
WITH THE CPU SECTION SLID TO THE RIGHT
Setting up your Megatouch Game
1.
After installing the game, make sure the
power cord is either routed through one
of the openings at the bottom of the
base (see Figure 5), or routed through
the hole in the back plate (see Figure
3). Plug the game into a standard AC
outlet, then close and lock the cash
door.
2.
Install the security key(s) following the
instructions provided with the key(s).
3.
Slide the CPU section to the right to turn
on the power switch mounted to the
back section of the game (see Figure
4) and wait for it to go through its boot-
up sequence. The game will display
the Player Menu Screen.
4.
The machine has been preset at the
factory and therefore should not need
to be adjusted, however it is recom-
mended that the screen be calibrated
(see Screen Calibration) and the coin
or bill acceptor(s) be tested.
5.
Follow the instructions under AMI
Music Setup to configure the music
settings.
6.
There are many custom settings avail-
able for the game. To customize the
settings, follow the software instruc-
tions in this manual.
POWER
SWITCH
LOCATION
7 MEGATOUCH WALLETTE/ENTERTAINER INSTALLATION AND OWNER’S MANUAL PM0673-03
