COPYRIGHT © 2004 MERIT INDUSTRIES, INC.
Site Preparation
In determining the location for your Mr.
VIPS™
video game, consideration must be
given to a suitable, grounded electrical out-
let. Since the game is a computerized de-
vice, it should have a separate circuit, if at
all possible. If a separate circuit is not avail-
able, care should be taken to provide a clean
and constant voltage. As a basic guideline,
never connect the unit to a circuit that also
supplies power to freezers, coolers or other
high power consuming and electrical noise
generating equipment. Place the game in a
location where nothing will interfere with
proper ventilation. The game should not be
exposed to any dripping or splashing liq-
uids. Objects filled with liquid should not be
placed on the unit.
This model should be located on a sturdy,
level surface. There are castor wheels on
the bottom of the game. Once the game is in
place, lock the front two wheels so that the
game will not move.
Setting up your Game
1.
After removing the game from the car-
ton, placing it where it will be located,
and locking the wheels, load the prize
products into the game. To load the
prizes:
•
Unlock and remove the upper back door
to load small and large prize products
in the back of unit (see Figure 12). Load
large prize capsules one at a time start-
ing with the lowest row and working
up to top row (see Figure 12). Load
small prize products by dumping them
into the small prize hopper (see Figure
12). After the small prize hopper has
been filled, use the extra small prize
storage if necessary by dumping prod-
ucts at the top of the extra storage col-
umn (see Figure 12). When finished,
replace and lock the upper back door.
1 MR. VIPS™ INSTALLATION AND OWNER’S MANUAL PM0441-03
•
To load the medium prize products, un-
lock the two locks in the display lid and
lift the lid up and back to expose the
display area (see Figure 11). Load the
medium prize products into the medium
prize fill hole.
•
With the display area open, place your
small, medium and large prize displays
in the appropriately marked display
compartments.
2.
Plug the game into a standard AC out-
let.
3.
Wait for the game to go through its
boot-up sequence. At the completion
of the boot-up sequence, the game will
display the Player Menu.
4.
The machine has been preset at the
factory and therefore should not need
to be adjusted, however it is recom-
mended that the screen be calibrated
(see “Screen Calibration”) and the coin/
bill acceptor(s) and prize motors be
tested. To test the motors, push the
red setup button located behind the up-
per coin door (see Figure 11) to display
the Main Menu, then select “Diagnos-
tics”. (See “Diagnostics Menu”.)
5.
There are many custom settings avail-
able for the game. To customize the
settings, follow the instructions begin-
ning with the Main Menu section in this
manual.
Game Description
Mr. VIPS™ comes housed in an 15” upright
cabinet. This model has 5 key-locked com-
partments: two rear doors, the display lid,
the coin/bill acceptor door and the coin box
door. It comes equipped with a coin mech
and bill stacker, and optional coin acceptors
for tokens or foreign coins are also avail-
able.
