COPYRIGHT © 2006 MERIT INDUSTRIES, INC.
FIGURE 4 - BACK OF EVO WALLETTE - CASH DOOR OPEN
Setting up your Megatouch Game
1.
After mounting the game, make sure
the power cord is either routed through
one of the openings at the bottom of
the base (see Figure 4), or routed
through the hole in the back plate (see
Figure 3). Plug the game into a stan-
dard AC outlet, then close and lock the
cash door.
NOTE: If applicable, phone and
Ethernet cables can also be routed
through the openings under the base
(see Figure 4).
2.
Slide the CPU section to the right to turn
on the power switch mounted to the
base of the game (see Figure 5) and
wait for it to go through its boot-up se-
quence. The game will display the
Player Menu Screen
.
3.
The machine has been preset at the
factory and therefore should not need
to be adjusted, however it is recom-
mended that the screen be calibrated
(see
Screen Calibration
) and the coin
or bill acceptor(s) be tested.
4.
There are many custom settings avail-
able for the game. To customize the
settings, follow the software instruc-
tions in this manual.
OPENINGS AT
BOTTOM OF BASE
(BOTH SIDES)
PHONE
CONNECTOR
ETHERNET
CONNECTOR
METER
5 MEGATOUCH EVO WALLETTE ION OWNER’S MANUAL PM0480-13