2
There are two MIDI output modes in each Meris pedal, and depending on your setup and use cases one will suit you
better than the other.
MIDI Thru:
Knob turns and switch presses do not create any MIDI messages. Any MIDI input messages that the pedal receives are passed
along to the output (which creates the “thru”). This is the most typical mode. Use this mode if only want to use MIDI to
control the pedal and you would not like to use the pedal to control any other gear further down the chain.
MIDI Out:
For every knob turn and button switch on your pedal, a MIDI messages is sent to the output. Any MIDI input messages that
the pedal receives are also passed along to the output as well. Use this mode if you want to synchronize with or control exter-
nal gear, like recording MIDI knob movements with your DAW.
Note:
Power cycle to exit and store your changes.
PRESET
MID
I
EX
P
TA
P
Tu
rn
kn
ob
to
se
lect
c l 1
-16 or Omni (knob
at m
ax)
Section 1c.
MIDI Thru
MIDI THRU ON: TOGGLE (R) FOOT SWITCH
(
R
) LED indicates MIDI THRU
(
L
) LED indicates MIDI OUT
