Meridian Media Core 600, Руководство пользователя

Страница: 8 / 12

Media Core 600 User Guide EN EN
To connect the Media Core 600 to a Sooloos
network
Connect the Network socket on each component to one of
the LAN network connections on your Router, using a CAT-5e
or CAT-6 cable.
Make sure the WAN/Internet port on the Router is connected
to the rest of your network, or to your Cable/DSL Modem.
Use the Meridian Sooloos Configuration application to specify
one of the Sooloos components as the Sooloos system core.
You can browse and control music on the system using the
Control 15, or using the Sooloos application on an iPad,
iPhone, or iPod Touch, or the Control:PC/Control:Mac
application on a computer.
To connect to a pair of Meridian DSP
loudspeakers
Each zone of the Media Core 600 can be connected directly to
a pair of Meridian DSP Loudspeakers, such as the DSP3200.
Connect the SpeakerLink output in the appropriate zone to
the SpeakerLink input of the Master DSP loudspeaker, using
a Meridian SpeakerLink lead.
Connect the output from the Master DSP loudspeaker to the
Slave DSP loudspeaker, using a Meridian SpeakerLink lead.
If you are using DSP3200s make sure the Channel selector is
set to the L/C position on the back of the left speaker and to
the R position on the back of the right speaker.
For other DSP loudspeakers configure the Master DSP
loudspeaker as
M.RJ45 and the Slave DSP loudspeaker as
S.RJ45
; see the
DSP Loudspeaker User Guide
.
To connect to a Meridian Audio Core 200
Connect the SpeakerLink output in the appropriate zone
to the SpeakerLink input of the Audio Core 200, using a
Meridian SpeakerLink lead.
•
•
•
•
•
To connect to a Meridian Digital Surround
Controller
You can connect the Media Core 600 to a Meridian Digital
Surround Controller, such as the G68.
Connect the Digital Out connector in the appropriate zone to
one of the G68 digital inputs, using a digital coax lead.
To connect to an analogue preamplifier
The analogue outputs allow you to connect the Media Core 600
to a preamplifier, active analogue loudspeakers, or the inputs of
a power amplifier.
Connect the Analogue Out connectors in the appropriate zone
to one of the preamplifier line inputs, using a stereo phono
lead.
If the output does not include a volume control, such as in
the case of a power amplifier, change the Media Core 600
analogue outputs from fixed to variable using the Meridian
Sooloos Configuration application.
•
•
•