background image

 

WARRANTY INFORMATION 

FULL ONE-YEAR WARRANTY 

Meridian 

Appliances undertakes to the 

consumer-owner to repair or, at 

Meridian

 

Appliances’ option, to replace any part of this 

product which proves to be defective in 
workmanship or material under normal personal, 

family or household use, in the U.S.A., for a period 

of one year from the date of original purchase. 

 

During this one year, 

Meridian

 Appliances 

will provide all labor and parts necessary to correct 
such defect, free of charge, if the appliance has 

been installed and operated in accordance with 

Meridian

 Appliances written instructions 

furnished with the appliance. Ready access to the 

appliance, for service, is the responsibility of the 

consumer-owner. 
 

Geographic Exception:

 If the product is installed 

at a location more than 50 miles from an urban 

area (minimum population 25,000), Equator 

Advanced Appliances may, at its option, offer a 

2-year parts only Warranty, if a service agent 
cannot be found. Responsibility for labor, in such 

instances will be that of the consumer-owner.  

Meridian

 Appliances will, however provide 

free technical assistance for repairs. 

 

WARRANTY SERVICE 

This warranty is given by 

Meridian

 

Appliances, 2801 W Sam Houston

, Suite 135

 

Pkwy N, Houston, Texas 77043-1611. Service under 

this warranty must be obtained by the following 

steps, in order: 

 
1. Call an 

Meridian

 Appliances Authorized 

Service Agent (obtain number of nearest one from 

your dealer or telephone directory). Under normal 

circumstances, service will be provided during 

regular business hours (9:00 a.m. to 5:00 p.m. 

weekdays). 
 

2. If service cannot be obtained, call the toll-free 

line 

800-

490

-

8018

 for assistance. 

 

GENERAL 

Since it is the responsibility of the consumer-owner 
to establish the warranty period by verifying the 

original purchase date, 

Meridian

 

Appliances recommends that a bill of sale, delivery 

slip or some other appropriate payment record be 

kept for that purpose. This warranty gives you 

specific legal rights, and you may also have other 
rights which vary from state to state. 

 

EXCLUSIONS 

In no event shall 

Meridian

 Appliances be 

liable for incidental or consequential damages or for 

damages resulting from external causes such as abuse, 

misuse, incorrect voltage or acts of God. 
 

This

 

warranty does not cover service calls which 

do not involve defective workmanship or 

materials covered by this warranty. Accordingly, 

diagnosis and repair costs for a service call 
which does not involve defective workmanship 

or materials will be the responsibility of the 

consumer-owner. 

 

In addition, the following work is not covered under 

warranty and does not constitute warranty work: 
 

•  Installation - improper hook-up or leveling 

•  Maintenance - cleaning of air and/or water filter. 

•  Damage - replacing broken door handle Most work is 

covered. The defining factor is, has the machine 

malfunctioned (

Meridian

 is responsible) or has the 

customer omitted or done something to cause 

machine to malfunction (customer is responsible.) 

 

Some states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above 

limitation or exclusion may not apply to you. 

 

Please Note : The warranty service for 

Meridian

 

units is provided by Appliance Desk and hence for 

service on any 

Meridian

 units please contact 

Appliance Desk. 

 

CONTACT INFORMATION 

 

APPLIANCE DESK 

2801 W Sam Houston Pkwy N, Suite 120, 

Houston, TX 77043-1611 

 

Phone:  

 

800-490-8018 

Fax :             832-201-0854

 

 

E-Mail 

Service: 

[email protected]

 

Parts: 

[email protected]

 

Tech : 

[email protected]

 

Содержание MD3720CEE































Отзывы: