Meridian HARVEST H10 Series, Руководство оператора

Страница: 13 / 53

4.4 Everyday Operation _
WARNING:
When auger is in operation, keep your hands, clothing, and other objects
away from intake hopper, drive chains, and all other parts of auger to
avoid personal injury.
For normal auger operations, the following procedure and safety precautions
are strongly recommended:
Complete the pre-operation checklist before using your auger.
Remember to ground motor before using auger if an electric motor is being
used.
When using the auger, work with another trained operator present to monitor
the operation and help with a shutdown in case of an emergency. Monitor the
auger during operation for vibration and abnormal noises. If anything out of the
ordinary is noted, shut down and lock out the auger, determine the source, and
correct before continuing operation.
Keep the hopper full and running at 540 RPM for maximum capacity. Pour grain
in the middle of hopper, closest to the tube for best results.
Run the auger only when moving material. Running the auger without grain
moving through causes unnecessary wear.
4.5 Shutting Down the Auger _
Empty the auger of all grain. Disengage the PTO drive. Shut down and lock out
power.
WARNING:
Never use your hands to clean out debris from auger. Rather, use a small
shovel or other tool.
In the case where there has been an interruption or emergency shutdown,
restart the auger as follows:
12