Meridian DSP520, Руководство пользователя

Страница: 6 / 12

DSP520/640 User Guide 6 EN EN
Front and back panel
Connections
The following diagram gives details of the connections on
the back of the loudspeaker:
Output Input
SpeakerLink
input
Power
output
Use this connection To connect to this
SpeakerLink input The SpeakerLink output of a Meridian
Audio Core or Digital Surround
Controller.
SpeakerLink output The SpeakerLink input of a second
DSP520/640 digital loudspeaker, when
connecting in a daisy-chain.
Power A captive power cord to connect to the
RF500/600 wall box power outlet.
Front panel
The following diagram gives details of the front of the
loudspeaker:
Right
Centre
Left
Fuse
~50-60Hz T5.0AH
250V for 100-230V~
CAUTION:
Disconnect supply before changing fuse.
Replace with same type fuse.
ATTENTION:
Débrancher avant de remplacer le fusible.
Utiliser un fusible de rechange
du même type.
On
Off
Channel
selector
Status indicator
and IR receiver
Fuse
Power
switch
Switch Description
Channel selector Set to Left, Right, or Centre to specify
the position of each loudspeaker.
Standby indicator
Status Description
Blue Loudspeaker in standby.
White Loudspeaker operating.
At power-up flashes once if IR is off and
twice if IR is on.
The loudspeakers are switched on or into standby as appropriate
via the SpeakerLink connections by the Meridian system they
are connected to. To configure the IR receiver
Hold down one of the following keys on an MSR remote (not
supplied) while powering up the speaker:
Next : Turns on IR; white LED flashes twice.
Previous : Turns off IR; white LED flashes once.
Stop : Resets all to factory settings; white LED flashes 3 times.