background image

About your Meridian DSP loudspeakers

These instructions provide information about unpacking, connecting up, 

confi guring, and using your Meridian 3100 DSP loudspeakers. They apply to the 

DSP3100 left and right loudspeakers, and the DSP3100HC horizontal centre 

loudspeaker.

Introduction

Meridian DSP loudspeakers represent the fruits of more than 25 years of continuous 

development of loudspeakers as musical instruments. The fi nest materials and state-

of-the-art design are combined to create what we believe is the ultimate range of 

home loudspeakers.

Digital Signal Processing

Digital Signal Processing, or DSP, is a technique pioneered by Meridian in hi-fi  

products for achieving extremely accurate reproduction of audio signals using high-

precision mathematical processing.

DSP allows sophisticated processing to be performed without any of the cumulative 

noise or degradation that inevitably occurs, even with high-quality analogue 

circuitry. In addition, the signal improvement techniques incorporated in the 

Meridian DSP loudspeakers would be virtually impossible to implement in the 

analogue domain.

If you are using the Meridian DSP loudspeakers with a digital source, such as CD or 

DVD, the signals remain in digital form until the last possible stage.

 Power amplifi ers

The speakers are driven by multiple independent high-power, low-feedback power 

amplifi ers. The combination of idealised magnetic design, careful star earthing, and 

very fast output devices gives the amplifi ers extremely low noise, high detail, and 

fast bass. 

The whole electronic assembly is supplied from substantial toroidal transformers 

feeding high-quality, audiophile-grade capacitors.

Meridian Comms

Meridian DSP loudspeakers are part of the Meridian family of advanced digital, 

analogue, and video components, and these incorporate a sophisticated 

communications link, to allow you to control any combination of units using a single 

remote, and ensure that they will work together as a fully integrated system.

Sales and service in the UK

Meridian Audio Ltd, Latham Road, 
Huntingdon, Cambridgeshire, PE29 6YE, 
England, Tel (01480) 445678, Fax (01480) 
445686, Web www.meridian-audio.com

Sales and service in the USA

Meridian America Inc, 8055 Troon Circle, Suite 
C, Austell, GA30168-7849, USA
Tel (404) 344 7111, Fax (404) 346 7111, 
Web www.meridian-audio.com

Designed, manufactured in the UK 

Copyright © 2002-2005 Meridian Audio Ltd., 
Part no: 3100U/1

Boothroyd|Stuart Meridian, Meridian, Meridian 
Digital Theatre, Meridian Lossless Packing, 

MHR and MLP are registered trademarks of 
Meridian Audio Ltd.

MHR:

 This product incorporates copyright 

protection technology covered by certain 
patent applications and intellectual property of 
Meridian Audio Ltd. This technology is 
provided for the express purpose of securely 
containing copyright audio within the 
Meridian System only. Reverse engineering or 
circumvention of this protection is strictly 
prohibited.

This guide was produced by: 
Human-Computer Interface Ltd, 
www.interface.co.uk

Copyright and acknowledgements

  Read the instructions

  Keep these instructions.

  Follow all instructions.

  Do not use this apparatus near water.

  Clean only with a dry cloth.

  Install only in accordance with 

manufacturer’s instructions.

  Refer all servicing to approved service 

personnel.

WARNING: TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE

  Do not expose the speakers to dripping or 

splashing.

  Do not place any object fi lled with liquid, 

such as a vase, on the speakers.

  Do not place naked fl ame sources, such as 

lighted candles, on the speakers.

To avoid interference

Do not position the unit:

  Near strong magnetic radiation.

  Near to a television, or where connecting 

cables may be subject to or cause 
interference.

To avoid overheating

  Leave at least 10cm around the equipment 

to ensure suffi cient ventilation.

Do not position the unit:

  In direct sunlight.

  Near heat sources, such as a radiator.

  Directly on top of heat producing 

equipment, such as a power amplifi er.

Radio interference

FCC Warning:

 This equipment generates and 

can radiate radio frequency energy and if not 
installed and used correctly in accordance with 
our instructions may cause interference to 
radio communications or radio and television 
reception. It has been type-tested and complies 
with the limits set out in Subpart J, Part 15 of 
FCC rules for a Class B computing device. These 
limits are intended to provide reasonable 
protection against such interference in home 
installations.

EU:

 This product has been designed 

and type-tested to comply with the 
limits set out in EN55013 and EN55020.

Important safety inst

r

uctions

Содержание 3100

















Отзывы: