background image

4-8

Revised 06.2021

Owner’s Manual: Smoothwall Bin

 

®

Fig 21 - Horizontal AirMax™ Aeration tube

Fig 23 - Vertical Aeration

-One-Piece

Fig 24 - Vertical Aeration

-Sectional

Fig 22 - AirMax™ In-Line fan

Fig 25 - AirMax™ Centrifugal fan

4.3  MERIDIAN AIRMAX

®

 AERATION SYSTEMS

One of these Airmax™ Aeration systems may 
have come with your bin to condition the product 
stored inside.

CORROSIVE MATERIAL HAZARD

Do not store fertilizer in a bin

containing an aeration system.

4.3.1  Airmax

 Horizontal Aeration System:

The horizontal aeration tube is inserted through 
the fan mount. Then the fan can be installed.
• Bolt the in-line fan to the mount in a way that 

the electrical lines can be routed conveniently.

The aeration tube is removable, to facilitate 
cleaning of the screen.
• Remove the fan, then unfasten the bolts and 

carefully pull the tube out of the bin.

• Once the tube is removed, replace the cover 

plate to prevent moisture and pests from 
entering the bin.

Horizontal Aeration Disclaimer:

Remove  the horizontal aeration tube if 
fertilizer will be stored in the bin. If left 
inside, it could limit or void the warranty if 
the cause of a claim is deemed to be from 
the storage of fertilizer.

4.3.2  Airmax

 Vertical Aeration System:

The internally mounted “rocket” has a hollow 
duct design formed by a self-cleaning perforated 
metal screen.

Bolt the centrifugal fan to the mount on the 
hopper bottom.

Содержание 1010-1015





























































Отзывы: