manualshive.com logo in svg

Mercusys MW306R, Руководство пользователя

Поделиться
Скачать
Mercusys MW306R Скачать руководство пользователя страница 140

131

FAQ: FAQ

• 

Use another web browser or computer to log in again.

• 

Reset the router to factory default settings and try again. If the login still fails, 
please contact the technical support.

     Note

: You’ll need to reconfigure the router to surf the internet once the router is reset.

Q4. What should I do if I cannot access the internet even though the 

configuration is finished?

1. 

Visit 

http://mwlogin.net

, and log in to with the password you set for the router.

2. 

Go to 

Advanced

 > 

Network

 > 

Status 

to check the Internet status:

If IP Address is a valid one, please try the methods below and try again:

• 

Your computer might not recognize any DNS server addresses, please manually 
configure DNS server.

1 )  Go to 

Advanced 

> 

Network

 > 

DHCP Server

.

2 )  Enter 8.8.8.8 as Primary DNS, and click 

Save

.

 Tips: 

8.8.8.8 is a safe and public DNS server operated by Google.

• 

Restart the modem and the router.

Содержание MW306R

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды