Mercury Villager 2001 Скачать руководство пользователя страница 67

Страница: 67 / 257

Tune adjust for CD changer (if equipped)

•

Press

to select the previous

disc in the CD changer. (Play will
begin on the first track of the
disc unless the CD changer is in
shuffle mode. Refer to

Shuffle

feature

for more information.

Hold the control to continue
reversing through the disc.

•

Press

to select the next disc in the CD changer. Hold the control

to fast-forward through the remaining discs.

Seek function

The seek function control works in radio, tape or CD mode.

Seek function in radio mode

•

Press

to find the next

listenable station down the
frequency band.

•

Press

to find the next

listenable station up the
frequency band.

Seek function in tape mode

•

Press

to listen to the previous selection on the tape.

•

Press

to listen to the next selection on the tape.

Seek function for CD changer (if equipped)

•

Press

to seek to the previous

track of the current disc. If a
selection has been playing for
three seconds or more and you
press

, the CD changer will

replay that selection from the
beginning.

•

Press

to seek forward to the

next track of the current disc. After the last track has been
completed, the first track of the current disc will automatically replay.

SEEK

TUNE

SEEK

TUNE

SEEK

TUNE

SEEK

TUNE

Controls and features

Содержание Villager 2001


































































































































































































































































Результаты поиска

Содержание Villager 2001

Отзывы:

Mercury Villager 2001, Руководство пользователя, Страница: 67 / 257

Результаты поиска

Содержание Villager 2001

Отзывы: