Mercury VesselView Mobile Скачать руководство пользователя страница 59

Страница: 59 / 115

Section 4 - Main Menu

90-8M0070299

eng

MAY 2012

Page 55

Factory Reset Menu

The "Factory Reset" menu is used to reset all VesselView settings to the factory default, or to perform a sensor detection.

When the VesselView is first configured during the setup wizard, the system will automatically detect sensors that are present

and ignores sensor inputs that have no sensors attached. If a sensor is removed from the system after the initial configuration,

VesselView will show faults for the removed sensor. VesselView will scan for sensors and eliminate the fault message.

Save Configs Menu

After the system has been completely configured, the "SAVE CONFIGURATION" option exports (saves) all configuration

settings to a USB memory stick for use with other VesselView units or for quick recovery of stored configuration settings. This

saves time by importing a configuration without having to complete the entire setup wizard and other calibrations.
IMPORTANT: The VesselView unit will recognize USB memory sticks of version 1.1 or a USB memory stick of version 2.0 that

is stated to be backwards compatible to version 1.1. The VesselView unit will not recognize memory sticks that are only version

2.0 compatible.

IMPORTANT: Configuration settings saved to a USB memory stick are compiled into one data file. Only one file can exist in the

root of the USB memory stick. VesselView will not recognize multiple import files.

Load Configs Menu

After a configuration file was exported to the USB memory stick, the "LOAD CONFIGURATION" menu imports the configuration

settings into another VesselView unit.

Settings

Settings Menu Options

IMPORTANT: The available VesselView menu items and options are dependent on the engine type, and if screens have been

manually turned on or off.
The "Settings" menu enables you to customize VesselView. The "Settings" menu items include the following:

47863

Setup

Calibrate

Settings

Alarms

System Info

Main

Favorites

Settings

Screen Options

Clock/Light

Preferences

Boat Speed

Warnings

Units

Units 2

Offsets

Screen Optio

Status bar

Steering

Trim Settings

Tab Settings

Autopilot

Screen Optio

Status bar

Steering

Autopilot

Screen Optio

Status bar

Steering

Trim Settings

Tab Settings

Pages On/Off

Settings

Alarms

System Info

Maintenance

Calibrate

Autopilot

Engine Status

NOTE: After any change or customization to the VesselView configuration, a blue pop‑up message will appear as a reminder to

save the session. It is recommended that all session changes be saved before holding the "

" button while keying all engines

off. Refer to

Section 1

‑

Saving the Settings

Содержание VesselView Mobile




















































































































Результаты поиска

Содержание VesselView Mobile

Отзывы:

Бренды по названию

Популярные бренды

Mercury VesselView Mobile, Руководство пользователя

Результаты поиска

Содержание VesselView Mobile

Отзывы:

Бренды по названию

Популярные бренды