Mercury VesselView 7, Руководство пользователя

Страница: 48 / 61

Section 5 - Screen Navigation
Page 44 90-8M0074777
eng
MAY 2013
Cruise Control Mode
Cruise Control
The cruise feature allows the operator to select a set‑point and adjust the value so the vessel maintains a specific speed or
engine RPM.
•
Cruise is RPM based, unless the vessel incorporated a Mercury Marine GPS into the control area network.
• If the vessel has a Mercury Marine GPS, the default setting is vessel speed.
• The operator can select either RPM set‑points or speed‑based set‑points. The type of cruise option selection can be
changed in the Settings menu.
•
Open the scroller bar and highlight the cruise icon. Refer to
Scroller Bar Icons
to identify the cruise icon.
NOTE: Cruise Control can be disabled by placing the remote control levers in neutral.
Cruise Control Contextual Data Area
Persistent Data Change
Cruise will modify the persistent data area of the screen by incorporating an RPM indicator within the RPM sweep, similar to
Smart Tow and ECO Mode targets.
•
When cruise mode is activated, elements of the persistent data will be modified to communicate:
• RPM set‑point.
• RPM sweep color will change to orange when active to indicate the engine is computer controlled.
a - Cruise not active
b - Cruise active
Cruise – Contextual Data Area
Cruise will modify the contextual data area of the screen when active.
•
Elements within the contextual data area will change to allow the user to set‑up:
a. RPM set‑point.
b. Cruise status enable or disable.
a - Set‑point value
b - Instruction
c - Enable
d - Minimize
e - Exit
Cruise Navigation
Cruise mode will have a modified navigation system similar to Smart Tow. The footer section of the contextual panel allows the
operator to enable or disable cruise, minimize, or exit the program element. Footer navigation will follow the same basic
navigation selection strategy as other features.
1. Use the rotary knob or flick to scroll through the selections in the footer.
2. Press the knob to activate the selection.
a. Enable or disable turns the element feature on or off.
b. Minimize will hide cruise data and display CRUISE in the system tray. This allows the operator to display information
from other selected icons.
a
b
52278
a
b
c
d
e
52279